Interlogix NVR 21 (S/P) User Manual - Manual (Page 38)

Chapter 5: Live view
32 TruVision NVR 21(S/P) User Manual
Table 8: Mouse menu for monitor A (ma8in monitor)
Item Name Description
1. Menu Enter the Main menu.
This option is not available from monitor B.
2. Single camera Switch to a full-screen view for the selected camera from the
dropdown list.
3. Multi camera Switch between the different multiview options from the dropdown
list.
4. Previous screen Displays the previous camera.
5. Next screen Displays the next camera.
6. Start sequence Turn on sequence mode. The screen automatically sequences
between cameras. See “Viewing in multiview” on page 33.
Go to Menu > Display Mode Settings > Layout > Dwell Time to set
up.
7. All-day playback Playback the recorded video of the selected day from the selected
camera. The current day is selected by default. See “All-day
playback” on page 55 for more information.
8. Monitor B Switch between monitors A (main) and B (event).
9. Advanced search Enter the advanced video search menu. See ““Searching recorded
video” on page 56” for more information.
10. Output mode Select Standard, Bright, Soft, or Vivid.
11. Close timebar Open/close the time bar.
Note: When the monitor B is active, the main monitor commands are unavailable.
Table 9: Mouse menu for monitor B (spot monitor)
Item Name Description
1. Single camera Switch to a full-screen view for the selected camera from the
dropdown list.
2. Multi camera Switch between the different multiview options from the dropdown
list.
3. Previous screen Displays the previous camera.
4. Next screen Displays the next camera.
5. All-day playback Playback the recorded video of the selected day from selected
cameras. See “All-day playback” on page 55 for more information.
6. Monitor A Switch between monitors A (main) and B (spot).