Interlogix Simon XT Rev B User Manual
Page 4
4
Simon XT Talking Touch Screen Quick Operation Guide
Avoid touching the touch screen face while you are
replacing the batteries.
3. Briefly disconnect the AC power (this will clear the battery
fault).
4. Reconnect AC power.
Note:
If AC power is lost and batteries are not present or are
depleted, the touch screen will not power up until AC power is
restored (even if new batteries are installed).
Cleaning the touch screen
If necessary, use a soft cloth to clear smudges on the screen;
do not use glass cleaner on the screen.
Reset button
The Reset button is located on the bottom left side of the touch
screen mounting plate. To power cycle the touch screen, use a
toothpick to depress the recessed Reset button.
Figure 1: Reset button
Opening slot
Reset button
Note: Dispose of the touch screen only in accordance with
local regulations.
Contact information
www.utcfireandsecurity.com
or
www.interlogix.com
For customer support, see
www.interlogix.com/customer-
support
© 2013 UTC Fire & Security Americas Corporation, Inc.
Interlogix is part of UTC Climate Controls & Security, a unit of
United Technologies Corporation. All rights reserved.