Interlogix IS-ZW-RC-1 - Manual (Page 4)

The screen displays SUCCESS.
This only removes individual number key control. The device is still
part of your home control network and can be controlled through
the GROUP, SCENE, and ALL controls.
To delete a device from your network:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
.
2. Press OK, and then press the right arrow key two times.
The screen displays DELETE.
3. Press OK.
4. Press the button on the device so that it communicates with
the remote.
The screen displays SUCCESS.
This completely removes the device from your home control
network and resets the device to its factory default settings.
Groups
Multiple Z-Wave devices can be turned on or off with a single
command when they are placed in a group. One example would
be grouping your porch light, exterior garage lights, and patio
lights together so that they can all be turned on if you hear a
strange sound in the middle of the night.
You can set up a maximum of 18 groups. A group can contain up
to 232 devices.
To create or add a device to a group:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
.
2. Scroll until the screen displays GRP SETUP, and then press
OK.
The screen displays ADD.
3. Press OK.
The screen displays SEL DIGIT.
4. Press the digit (1 to 9) for the group to which you wish to add
the device. Press SHIFT and the digit (1 to 9) if you are adding
a device to groups 10 through 18.
5. Press OK.
The screen displays SETUP WAITING.
6. Press the button on the device so that it communicates with
the remote.
The screen displays SUCCESS.
To control a group:
1. Press GROUP to put the remote into Group control mode.
The screen displays GROUP. The remote will stay in this mode
until the Light, Scene, or All mode is activated.
2. Press the digit key for the group you wish to control (1 to 9).
Press SHIFT and the digit (1 to 9) if you are controlling groups
10 through 18.
The screen displays the selected group.
3. To turn a group on, press and release the ON key for less than
one second. The screen displays the selected group and ON.
To turn a group off, press and release the OFF key for less
than one second. The screen displays the selected group and
OFF
.
To remove a device from a group:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
.
2. Scroll until the screen displays GRP SETUP, and then press
OK.
3. Press the right arrow key once.
The screen displays REMOVE.
4. Press OK.
The screen displays SEL DIGIT.
5. Press a digit (1 to 9) for the group from which you want to
remove the device. Press SHIFT and the digit (1 to 9) if you are
removing a device from groups 10 through 18.
6. Press OK.
The screen displays SETUP WAITING.
7. Press the button on the device you wish to remove.
The screen displays SUCCESS.
This only removes the device from a specific group. The device is
still part of your home control network and the group still exists (if
it included more than one device).
To delete a group:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
.
2. Scroll until the screen displays GRP SETUP, and then press
OK.
3. Press the right arrow key two times.
The screen displays DELETE.
4. Press OK.
The screen displays SEL DIGIT.
5. Press a digit (1 to 9) for the group you wish to delete. Press
SHIFT and the digit (1 to 9) if you are deleting groups 10
through 18.
6. Press OK.
The screen displays SUCCESS.
This only deletes the specific group. All of the devices are still part
of your home control network.
4 of 8 P/N 1069507 • REV A • ISS 18NOV09