ISP Technologies Trimax - Manual (Page 4)

subwoofer cabinet is made of high quality 13 ply Baltic birch plywood with a durable spray
on black finish for long life.
PLACEMENT
The Trimax Subwoofer is designed to sit on the floor or stage. Do not position or mount the
cabinet where it can tip over and fall on someone. Do not attempt to mount the cabinet on
speaker stands. Do not attempt to ‘fly’ (suspend by cables, chains, ropes, etc.) the cabinet.
It was not designed for flying. Position it only on a flat, stable surface where it is not in
danger of tipping over.
Also, note that the placement of the cabinet relative to floors and walls will affect the low
frequency response (below about 250 Hz.). Placing it closer to the floor and walls will
reinforce the low frequency response. The closer it is, the higher in frequency this
reinforcement will go. Also, make sure that adequate space (at least 6 inches) is left
behind the cabinet for airflow over the amplifier heatsink.