Automatic operation features s3, Automatic operation features, Automatic – Philips CCX134AT User Manual
Page 53: Operation features s3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic
Operation Features S3
The following playback features will always operate:
Automatic Playback
When you put a tape In theTVA^CR, the power will come on
automatically, (f the tape’s record tab is missing, playback will
begin. {If a timer recording is set, you may have to press the
POWER button to turn on theTVA^CR, If a timer recording is set
and you insert a tape without a record tab, theTVA^CR will eject
the tape.)
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
TVfVCR
will rewind the tape, stop, turn itself off, then eject the
tape. If a tape counter memory is set,theTVA^CR will only
rewind the tape to the point at which the tape counter was set to
zero, then stop. The TV/VCR will not turn itself off or eject the
tape.
Memory Rewind, Power Off
When the POWER button is pressed while theTVA/CR is rewind
ing a tape, REW -> POWER OFF will appear on-screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a tape counter memory is set, the TV/VCR may only rewind the
tape to the point at which the tape counter was set to zero, then
turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when die power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR has automatic tracking, which continually adjusts
tracking to give you the best possible picture quality. With some
recordings, however, you may get a better picture using the manual
tracking controls (see below).
Manual Tracking
To adjust the tracking manually during tape playback, press the
TRACKING Up/Down buttons on the remote control.
NOTES:
• To return
tracking to
the pos/tron
it
was
in when the TV/VCR was
shipped from the factory, press the CHANNEL Up/Down buttons
on
the TV/VCR
at the same time.
•
Tracking
is
returned to automatic trading when a tape is inserted, or
when the Stop/Y button
is pressed to
halt playback.
Before
Tracking
Adjustment
After
Tracking
Adjustment