To start the demonstration mode, Easy set, Switching the system on – Philips FW540C User Manual

Page 15: Switching the system to standby mode, Selecting the source, Selecting the equalizer display, Press digital sdund control, Operating the system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATING THE SYSTEM

To start the demonstration mode

• Press and hold

STOP*CLEAR

(on

the system onlyliot

five seconds

when

the system is in standby mode.

The demonstration will begin.

Easy Set

EASY SET allows you to store all available

radio stations automatically.

1

Press and hold

STANDBY ON

(on the

system onlyjiot

five seconds,

when

the system is in standby or

demonstration mode.

"E

h

SY SET" will be displayed,

and followed by "TUNER" and then

EASY SET will start searching for all

radio on FM band and then followed

by radio stations on AM band.

-* All available radio stations with

sufficient signal strength will be

stored. Up to 40 presets may be

stored.

Notes:

- EASY SET will start with the FIYI band, if

there are still presets available, the

system will continue to store the AtY!

band.

-

When EASY SET is used, all previously

stored radio stations will be replaced.

-

The last preset radio station will appear

on the display when EASY SET is

completed.

Switching the system ON

• Press

STANDBY ON

(on the system

only),

CD, TUNER, TAPE

or

AUX

You can also switch on the system by

pressing any one of the CD DIRECT PLAY

buttons.

Switching the system to

standby mode

• Press

STANDBY ON

again or (¡) on the

remote control.

The system will switch to standby

mode.

Selecting the Source

• Press the respective source selection

button:

CD, TUNER, TAPE

or

AUX

— The display indicates the selected

source.

Note:

- Eor an external source, make sure you

have connected the audio left and right

OUT terminals of the external

equipment (TV, VCB, Laser Disc player or

DVD player) to the AUX IN terminals.

Selecting the Equalizer

Display

You can select the desired equalizer display

for the system. You must not press the DSC

button on the system before using the JOG.

• Press the

JOG

A

or

T

to select the

desired Equalizer Display, NORMAL,

TOP DOWN, or NITE MODE.

— The selected display will be shown.

NORMAL Display

TOP DOWN Display

NITE MODE Display

Note:

- In NITE MODE, all lights will be

switched off and the display brightness

will be dimmed.

Sound Control

VOLUME ADJUSTMENT

Adjust

VOLUME

to increase or decrease

the sound level.

For Personal Listening

Connect the headphones plug to the Q

socket at the front of the system. The

speakers will be muted.

DIGITAL SOUND CONTRDL (DSC)

The DSC feature enables you to adjust the

system to suit your type of music.

• Press

DIGITAL SDUND CONTROL

(DSC)

to select OPTIMAL, CLASSIC,

TECHNO, JAZZ, ROCK or VOCAL.

-* The selected digital sound is

encircled.

- " O P T I T i H L X . C E H S S I E ,

T E C H N O X , J F l Z I X , ROCK

X

or i•••TJC.HL. .X" will be

displayed. "X" is the pre-selected

level.

15

Advertising
This manual is related to the following products: