Philips FW540C - Manual (Page 23)

TAPE
M I M H i f l S Y S T E M
H
I I
' >
\\
C D 1 - 2 - 3 T A P E 1 - 2
. ,/[‘:: j 'OO l ™ TLINtH : TAPE
^ CUSSI
.••J m
V I L ' r O
AUX
II : . M i H
O '
! I
<X ' ■/ / /
'■///
SOUND NAVIGATION
/ /
\ \ \ / / ^
TAPE 1 TAPE 2
PLAY/REC PLAYBACK
RfCO.no PLAY ►
«
►► STOP OPEN PAUSE PLAY ► ►► STOP OPEN PAUSE
— — J
— -
---------
- - - - -
---------
- ---------------------------------- --------------- '
r
Loading a tape
• Press ST0P*0PEN
• The tape deck door opens.
• Load the tape with the open side
downward and the full spool to the left.
• Close the tape deck door.
Tape Playback
1 Press TAPE to select TAPE mode.
_ 'THpE" will be displayed.
2 Load the tape into the selected tape
deck.
3 Press PLAY ► to start playback.
• To interrupt playback, press PAUSE.
• To resume playback, press PAUSE
again.
4 Press STOP»OPEN to end playback.
Rewind/Fast Forward
At the stop mode
1 You can rewind or fast forward a tape
by pressing ◄◄ or ►► , respectively.
— The tape will stop automatically at
the end of rewinding or fast
forwarding.
2 Press STOP»OPEN to stop rewinding or
fast forwarding.
Continuous Playback From
Tape Deck 2 to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape decks 1 and 2.
3 Press- PLAY ► on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY ►on tape deck 1.
Playback will begin with tape deck 2
and will continue with tape deck 1
when playback on tape deck 2 ends.
6 Press STOP*OPEIM if you want to stop
playback before the end of the tape in
tape deck 1 or tape deck 2.
Notes:
- During rewinding or fast forwarding of a
tape, it is also possible to select another
source (e.g. CD, TUNER or AUX).
- Before use, check and tighten slack tape
with a pencil. Slack tape may get
jammed or may burst In the mechanism.
- C-120 tape is extremely thin and is
easily deformed or damaged. It Is not
recommended for use in this system.
- Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV or speaker).
23