Canon IP ReadyTM Series Video Alarm FDP75C12N - Manual (Page 16)

-  -
½"
INSTALLING QUICK RELEASE BRACKETS
PIXORD 261 / 262
2630 Mounting Plate:
1. Install the camera to the 2630 mounting plate using
the (3) 8 x 32 x .5 flat head screws, nuts and washers
provided.
2. The PIXORD 261/262 cameras require ½“ of spacing to
properly position the camera within the housing. Use
(4) ½” spacers provided in the hardware packets.
3. Place (3) 8 x 32 x s Phillips head screws on the top
of the spacer as shown above. Be sure to place the
screws so that they line up with the open slots on the
mounting plate.
4. Slide the mounting plate with camera into position on
top of spacers. Secure 3 screws and captive fastener.
Attach camera using these (3) holes