Philips T980 - Manual (Page 9)

Hair Collection Chamber
Q
Turn the Trimmer OFF.
Q Open the ClearView Hair Collection
chamber cover. The cover opens from the
left side of the Trimmer to ^e right
side (Fig. 14).
a
Remove the hairs by carefully shaking them
out or by brushing them out with the
cleaning brush supplied (fig. 15).
> When trimming extremely long, dense beards,
it may be necessary to empty the Hair
Collection Chamber during the trimming
session in order to maintain optimal suction
performance.
> If suction performance is not as strong as usual.
Hair Collection Chamber may require
emptying to restore optimal performance.
I It is recommended that the Hair Collection
Chamber be emptied and cleaned out after
each use.
I Do not operate the Trimmer with the Hair
Collection Chamber cover opened.
Trimmer
D
Make sure the Trimmer is turned OFF and
disconnected from the electrical outlet.
o
Remove the Guide Comb Attachment
(fig. 10).
□ Remove the cutting unit (fig. 11).
a
Clean the cutting unit and the inside of the
Trimmer with the brush supplied (fig. 16).
B Re«attach the cutting unit and the Guide
Comb into place on the Trimmer (fig. 17).
ReplacingThe Cutting Unit
If vQur cutters andiJter become damaged or
worn, do not continue using thcTnmmer. Repiace
cutters and/or filter immediately.
Thfs Trimnrwy has no other user-serviceablc oarts.
For assistance call I •BQO-243-3050,
Assistance
For Assistance, call loll free:
1-800-243-3050
or visit our website: www.phitips.com/
norelco
Information is available 24 hours a day. 7 days a
week.
Storage
> Be sure Trimmer is turned off and remove cord
from outlet and Trimmer before scoring in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
> Do not wrap cord around Trimmer when
storing.
I Score Cord in a safe location where it will not
be cut or damaged.
> Do not place or store Trimmer where It can
fäll or be pulled into a cub or sink, water or
other liquid.