Playing a cd, Cd player – Philips AZ1509-17 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD PLAYER
Playing a CD___________________________________________________
1 Select the CD player by pressing the CD-TAPE-TUNER button
until BEl appears on the display.
2 Open the tray by pressing the OPEN-CLOSE
A
button.
3 Insert an audio CD (printed side up) and close the tray by
pushing it gently or pressing the OPEN-CLOSE
A
button again.
-► The CD player starts and scans the contents list of the CD.
Display indication: the total number of tracks and the total
playing time. After that the CD player stops.
4 Press the PLAY-PAUSE ►!! button to start CD play.
-► Display indication: the current track number and the elapsed
time of the current track.
5 Press the STOP ■ button to stop CD play.
-► Display indication: the total number of tracks and the total
playing time.
You can interrupt CD play by pressing PLAY-PAUSE ►!!.
Continue CD play by pressing the button again.
-► Display indication: the time where playback was stopped
flashes.
Notes: CD play will also stop if:
- you open the tray;
- you push the POWER button or
- the end of the CD is reached.
If you make a mistake operating the CD player, or the CD
player cannot read the CD, the display indicates
Error
(see
TROUBLESHOOTING).
W
2-0
12