Operation, Selecting another track during play (1-0), Searching for a passage during play – Philips CD 931 User Manual

Page 6: Starting with a particular track (1-0)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

@) OPERATION

m

3

(£_

3)'

DISPLAY

PLAYBACK (PLAY/REPLAY)

REPEAT - Lights up when you repeat a CD or a programme.
REPEAT 1 - Lights up when you repeat a track.

(((O - Lights up when the player receives a command from the

remote control (only if no ESI BUS connection has been
made).
FTS

- Flashes after the FTS key has been pressed.
- Lights up when an FTS programme is played.

SHUFFLE - Lights up when the tracks are played in random

order.

PROGRAM

- Flashes when a programme is being compiled.
- Lights up when a programme is being played.
TRACK - Indicates:
- what track is being played;

the number of tracks on the CD or in a programme.

TRACK TIME - Indicates the elapsed playing time of the track

being played.
REM(aining) TRACK TIME - Indicates the remaining playing

time of the track being played.

TOTAL REM(aining) TIME - Indicates the remaining playing

time of the CD or a programme.

TOTAL TIME - Indicates the total playing time of the CD or a

programme.

PAUSE - Lights up when play is interrupted.

AUTOSPACE - Lights up when an extra pause is inserted

between the various tracks.

11IIIII FADER II III II - Indicates the fade-in and fade-out time.

EDIT - Lights up when the player is put into the EDIT mode.

1-20 track number indicator - Shows the number of tracks

on the CD.
+20 - Lights up when there are more than 20 tracks on the CD.

READING - Lights up when the CD's contents list is being

scanned.

LOADED - Lights up when you press STOP/CP during the

scanning of the CD's contents list.

NO DISC - Lights up when you try to start play while there is

no CD in the compartment.

ERROR - Lights up if you try to start play when the CD is inserted

with the printed side facing down or if the CD is damaged.

WRONG TRACK - Lights up if you select a non-existent track

number.

GO TO PLAT - Lights up if you try to activate a function for

which you must first start play.

GO TO STOP - Lights up if you try to activate a function for

which you must first stop play.

NOTE!

Use only audio CDs; no CD-ROM, CD-

or CDV.

• Press POWER STANDBY/OFF to switch the player on.
• Open the CD compartment by pressing OPEN/C^LOSE.

- OPEN lights up.

• Insert an audio CD, printed side up, and close the

compartment.

- CLOSE lights up, followed by READING; the number of

tracks and the playing time of the CD are shown on the display.

• Press PLAY/REPU\Y to start play.

You can also press PLAY/REPLAY immediately after inserting
the CD; the compartment then closes automatically.

- The number indicator shows how many tracks are on the

CD; when a track has been played its number disappears.

- The track being played is always shown under TRACK and

its elapsed playing time is shown under TRACK TIME.

- Play will stop after the last track.

• Press POWER STANDBY/OFF to switch the player off.

You can interrupt playback by pressing PAUSE; PAUSE then

lights up. Press PLAY/REPLAY to restart; if you first press
PAUSE again and then PLAY/REPLAY, the current track starts

again from the beginning.

If you press PLAY/REPLAY during play, the current track starts

again from the beginning.
You can stop playback by pressing STOP/CP or OPEN/CLOSE.

SELECTING ANOTHER TRACK DURING PLAY (1-0)

• Key in the desired number (numbers consisting of two

figures must be keyed in within 2 seconds).

- The music stops and a moment later the selected track

begins to play.

You can also select the number by using TRACK ►! or

!◄ TRACK.

SEARCHING FOR A PASSAGE DURING PLAY

(◄◄ SEARCH ►►)

Hold
Hold

down to search backwards to the beginning,
down to search forwards to the end.

The searching speed is determined by how long a key is

pressed:

- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.

If you reach the end of the last track and release ►►, play will

resume a few seconds before the end of the CD.

STARTING WITH A PARTICULAR TRACK (1-0)

• Key in the required number (numbers consisting of two

figures must be keyed in within 2 seconds).

- Play starts from the selected track.

You can also select the number by using TRACK ►! or

!◄ TRACK and then pressing PLAY/REPLAY.

Advertising
This manual is related to the following products: