Cisco 78-10450-02 - Manual (Page 10)

Chapter 46 Configuring Cisco IP Phones in Cisco CallManager
Configuring Cisco IP Phones
46-10
Cisco CallManager Administration Guide
78-10450-02
Calling Party
Selection Determines what to display if a
call to this device is forwarded or
transferred. • Originator—send the directory number
of the calling device.
• First Redirect Number—send the
directory number of the redirecting
device.
• Last Redirect Number—send the
directory number of the last device to
redirect the call.
Caller ID
Presentation Determines whether the central
office transmits or blocks caller
ID. Select Allowed if you want the Central
Office to send caller ID.
Select Restricted if you do not want the
Central Office to send caller ID.
Display IE Delivery When this box is checked, it
enables delivery of the display
IE (incoming exclusion) in
SETUP and CONNECT
messages for the calling and
called party name delivery
service. By default, Display IE Delivery is disabled.
Media Termination
Point Required Determines whether or not a
Media Termination Point is used
to implement features that H.323
does not support (such as hold
and transfer). Used for H.323 devices that do not support
the H.245 Empty Capabilities Set message.
Cisco IP Phone - External Data Locations (leave blank to use the default)
Directory Specifies the primary and
secondary servers from which
the phone obtains directory
information. Only used for Cisco IP Phone 7960 and
7940 models.
Information Specifies the location (UL) of
the help text for the information
(i) button. Only used for Cisco IP Phone 7960 and
7940 models.
Table 46-1 IP Phone Configuration Settings (continued)
Field Description Usage Notes