CBC CTR-030NC-2 - Manual (Page 22)

20
RECORDING
REPEAT RECORDING
This function is used to select various options before starting a
recording.
• STOP AT EOT: Goes into STOP mode when it reaches end of
tape in RECORD mode.
• RE-REC EVEN IF ALARM: Rewinds tape and enters
RECORD mode at beginning of tape even if there has been
alarm.
• REWIND, STOP: Rewinds tape and then enters STOP mode.
• STOP IF ALARM: If there has been alarm, it goes into stop
mode when it reaches end of tape in record mode. Otherwise
it operates same as RE-REC even if alarm mode.
• We do not recommend repeat recording for security
applications.
• Make sure a tape is in the each VCR and the safety tab is in
place otherwise, the tape will be automatically ejected.
• Turn on the power of both the VCR and the monitor.
Things to know before starting
1 Press MENU button and the main menu will appear.
2 Press the DOWN or UP to select REC MODE SET UP. Press
ENTER. The REC MODE menu will display.
3 Press DOWN or UP to choose the REPEAT OPTION item.
Press ENTER repeatedly to choose options.
4 Press MENU when finished. Press MENU repeatedly to exit
menu screen.
5 Press REC button.
The VCR will start recording.
MAIN MENU
REC MODE MENU
MENU
VCR SET UP
REC MODE SET UP
TIMER REC SET UP
ALARM SET UP
POWER FAIL RECALL
LANGUAGE ENGLISH
(UP) (DOWN) (ENTER) (MENU)
REC MODE
REC TIME L6H
TRIGGER OUT 1 FIELD
SERIES ON
REPEAT OPTION :
STOP AT EOT.
(UP) (DOWN) (ENTER) (MENU)
SHARPNESS
HARD
POWER
TIME/CNT/REM
ALARM/INDEX
COUNTER
CLEAR
TIMER
V-POS
REC/PLAY HOURS
CURSOR
TRACKING
H-POS
MENU
ENTER
SOFT
LOCK
ON OFF
REC