CBC CTR-030NC-2 - Manual (Page 25)

23
RECORDING
ALARM RECORDING
Alarm recording will start when the external alarm signal is input.
This function is available when VCR is connected with an exter-
nal device having an alarm output terminal.
The ALARM SET UP menu will appear.
The recording mode is changed as below.
OFF ➔ L6H ➔ L18H ➔ L30H
The duration of recording is changed as below.
30 SEC ➔ 1 MIN ➔ 3 MIN ➔ 5 MIN ➔ 10 MIN ➔ T.END ➔ AUTO
• If you choose the T.END, alarm recording continues until tape
ends.
• If you choose AUTO, alarm recording continues until the alarm
reset signal is input.
• Before alarm recording, refer to page 10 for Alarm Record
connection.
• Make sure a tape is in the VCR and the safety tab is in place.
Things to know before starting
1 Press MENU and the main menu will appear
2 Press the DOWN or UP to choose the ALARM SET UP item
and then press ENTER.
3 Press the DOWN or UP to choose the REC MODE item.
Press ENTER repeatedly to choose recording hours.
ALARM SET UP
4 Press DOWN to choose the DURATION item. Press ENTER
repeatedly to choose the desired duration of recording.
MAIN MENU
MENU
VCR SET UP
REC MODE SET UP
TIMER REC SET UP
ALARM SET UP
POWER FAIL RECALL
LANGUAGE ENGLISH
(UP) (DOWN) (ENTER) (MENU)
ALARM SET UP
REC MODE L6H
DURATION 1 MIN
BUZZER ON
ALARM READY ON
ALARM RECALL
(UP) (DOWN) (ENTER) (MENU)
SHARPNESS
HARD
POWER
TIME/CNT/REM
ALARM/INDEX
COUNTER
CLEAR
TIMER
V-POS
REC/PLAY HOURS
CURSOR
TRACKING
H-POS
MENU
ENTER
SOFT
LOCK
ON OFF