Cygnion CG 2400 - Manual (Page 101)

Chapt
e
r 4:
Ful
l S
y
st
e
m
Co
nfi
g
urat
ion
89
4. To listen to the message, click .
5. To save the message, click Save. The .wav file
will be saved in the default directory (usually
Program Files\CG@Work\Data) as junkcall.wav.)
External Line Setup
Click External Line(s) on the resources panel.
The available external lines will appear below and the
corresponding properties panel will appear to the
right:
NOTE: Each external
line must be set up
individually.
The External Line Summary on the properties panel
shows which analog line sockets on the base station
are used and the names assigned to each. (If you
have only one phone line connected to your CG 2400
system, only one line will appear.)
From this panel, you can add or delete a line or
change a line’s name. You can also configure a line’s
settings by accessing that line’s property tabs:
General • Setting a line’s general properties.
Business Hours • Defining business hours and non-business hours.
Routing • Setting how calls on a specific line are routed
during business or non-business hours.