Chief Manufacturing PF1 Series - Manual (Page 7)

Installation Instructions MF1, MF2, PF1, PF2 Series
7
Figure 5
3. Place top base section and center post assembly on top of
the four base pieces. (See Figure 6)
4. Fasten lower base pieces to top base section and center
post assembly using twelve 5/16-18 x 1/2" flat head cap
screws (L). (See Figure 6)
Figure 6
Attaching Single Head Assembly
1. Attach head assembly (D) or (E) to the stand assembly
using four 5/16-18 x 3/4" button head cap screws (M). (See
Figure 7)
Figure 7
Attaching Dual Head Assembly
1. Place head assembly (D) or (E) on the front of the stand
assembly. (See Figure 8)
Figure 8
2. Place second head assembly (D) or (E) on the back of the
stand assembly, and on top of the front head assembly.
(See Figure 8)
3. Use four 5/16-18 x 3/4" button head cap screws (M) to
fasten through both head assemblies. (See Figure 8)
4. Fasten through back head assembly and back of stand
assembly using one 1/4-20 x 3/8" button head cap screw (K)
and one 1/4" washer (P). (See Figure 8)
(C) x 4
(C) x 4
4
(L) x 12
(F)
Front
(M) x 4
(D) or (E)
(F)
(PF1 Shown)
(Back view of stand)
1
2
4
3 (M) x 4
(K) x 1
(P)x1
(MF2 Shown)
Back of stand