Cobra Electronics Radar Detector - Manual (Page 3)

Quick Start
5
Turn On and Adjust Volume Turn On and
Adjust Volume
Installation
4
Note
It will be easy for you to
remove and reinstall your
Cobra ESD-9550 detector at
any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
mounted as above), be
sure you that your Cobra
ESD-9550 has a level,clear
view of the road before you
attach the hook and loop
material.
Dash Mounting Dash
Mounting
Plug power cord
into detector. Plug power cord
i nto cigare t te lighte r.
Peel protective
paper off one side
of hook and loop
material. Place on dash.
Peel top paper off. Place detector on
hook and loop pad.
1 2
3 4
5 6
Rotate ON-OFF Volume Control to left (away
from you). An audible “tone” will indicate
the unit is on. The unit will perform a self-
test and the following message will appear
…Testing…System Ready.
1
Note
For your convenience
Display Dim, City/Highway,
and Muting mode settings
are retained in memory
even when the power is
unplugged.
*9550.MANUAL 8/9/00 12:21 PM Page 4