Chaparral K5312/K7313 - Manual (Page 55)

Creating and Managing Arrays
4-21
3
Select Expand Function and press Enter.
The expand menu displays.
4
Select View Expand Status and press Enter.
The Expand Status screen displays.
5
Press Esc to return to the expand menu.
Changing the Array LUN
You can change the LUN assigned to an array, as it appears under the controller’s
target ID from the host system’s point of view. The change takes place immediately,
however, you may need to reboot the host system to see the array at the new LUN.
Note: You cannot change the array’s LUN to one that is already in use. If
you want to use a LUN that is already in use, you must first reassign the
LUN in use.
For more information about LUNs and your controller, see Understanding LUNs on
page 7-4.
To change the array LUN:
1
From the System Menu, select Array Menu and press Enter.
The Select Array screen displays with a list of existing arrays.
2
Select the array you want and press Enter.
The Array Menu screen displays.
3
Select Change LUN and press Enter.
The New LUN screen displays.
4
Enter the LUN you want to use and press Enter.
The system confirms that you want to make the change.
5
Select Yes and press Enter.