Canon Multimedia Projector LV-8235 UST - Manual (Page 15)

15
Part Names and Functions
Note:
To ensure safe operation, please observe the following precautions:
• Do not bend, drop, or expose the remote controller to moisture or heat.
• For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any chemical material.
Remote Controller
② AUTO SET button
Execute the setting of Auto setup
(includes Auto input function and
Auto PC function). (pp.28, 53)
⑤ S-VIDEO button
Select the S-VIDEO input source. (p.43)
⑥ Point  buttons
– Select an item or adjust the value in the On-Screen Menu.
(p.25)
– Pan the image in the Digital zoom + mode. (p.41)
⑬ MUTE button
Mute the sound. (p.29)
⑦ SCREEN button
Select a screen mode. (pp.31, 40-42, 48-49)
⑰ P-TIMER button
Operate the P-timer function. (p.31)
⑩ BLANK button
Temporarily turn off the image on the screen. (p.31)
⑯ LAMP button
Select a lamp mode. (pp.30, 60)
⑲ KEYSTONE button
Correct the keystone distortion. (pp.28, 42, 49)
⑳ OK button
– Execute the selected item. (p.25)
– Zoom in and out the image in Digital zoom mode. (p.41)
⑧ MENU button
Open or close the On-Screen Menu. (p.25)
⑨ FREEZE button
Freeze the picture on the screen. (p.30)
⑫ VOLUME +/- buttons
Adjust the volume level. (p.29)
① POWER button
Turn the projector on or off. (pp.22-
24)
③ COMPUTER 1/2 buttons
Select the COMPUTER 1 or
COMPUTER 2 input source.
(pp.32-33, 44)
⑪ D .ZOOM +/- buttons
Zoom in and out the images. (pp.30, 41)
⑭ IMAGE button
Select the image mode. (pp.31, 38)
㉑ COMPONENT button
Select the COMPONENT input source. (p.44)
④ VIDEO button
Select the VIDEO input source.
(p.43)
⑱ INFO . button
Operate the information function. (pp.30, 65)
⑮ 3D button
Operate the 3D function. (pp.31, 50-51)
㉒ HDMI button
Select the HDMI input source. (p.44)
3D
⑦
⑭
⑩
㉑ ④
⑲
②
⑧
⑨
⑬
⑰
⑤
⑥
⑪
⑫
⑳
⑯
③
⑱
①
⑮
㉒