Canon Multimedia Projector LV-8235 UST - Manual (Page 39)

39
Computer Input
Image adjust Menu
Image Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point  buttons to select Image
adjust and then press the Point  or the OK button.
1
2 Use the Point  buttons select the desired item and
then press the OK button to display the adjustment
dialog box. Use the Point  buttons to adjust the
setting value.
Note:
• When White balance Red, Green or Blue is
adjusted, Color temp. will change to User.
Press the Point  button to decrease the contrast; press the
Point  button to increase the contrast (from 0 to 63).
Press the Point  button to decrease the brightness; press
the Point  button to increase the brightness (from 0 to 63).
Press the Point  button to lighten R/G/B tone; press the
Point  button to deepen R/G/B tone (from 0 to 63).
Use the Point  buttons to select the desired Color temp.
level (XLow, Low, Mid, or High).
Use the Point  buttons to adjust the gamma value to
obtain a better balance of contrast ( Default, 1 .8, 2 .0, 2 .2,
2 .4, or 2 .6).
Press the Point  button to decrease the sharpness of the
image; press the Point  button to increase the sharpness
of the image (from 0 to 15).
To reset the adjusted data, select Reset and press the OK
button. A confirmation box appears and then select Yes. All
adjustments will return to their previous figures.
Use the Point

buttons to adjust the
setting value.
Selected Image mode
To store the adjusted data, select Store and press the Point
 or the OK button. Use the Point  buttons to select one
from User 1 to 4 and press the OK button.
A confirmation box appears and then select Yes. Stored
data can be called up by selecting an User (1-4) in the
Image Mode Selection on page 36. A confirmation box appears and
then select Yes .
Store Menu
Contrast
Brightness
Color temp .
White balance (Red / Green / Blue)
Sharpness
Gamma
Reset
Store