Canon Multimedia Projector LV-8235 UST - Manual (Page 26)

26
For detailed functions of each menu, see “Menu Tree” on pages 74-75.
①
②
③
④
⑤
⑥
⑦
⑧
Main Menu Sub-Menu
⑨
⑩
① Input Used to select an input source from COMPUTER 1, COMPUTER 2, HDMI, VIDEO or
S-VIDEO. (pp.32-33, 43-45)
② PC adjust Select Auto PC, Fine sync, Total dots, Horizontal position, Vertical position,
Current mode and Clamp to adjust the parameters to match with the PC input signal
format. (pp.35-37)
③ Image select Used to select an image mode from among Presentation, Standard, High contrast,
Cinema and User 1-4. (p.38)
④ Image adjust For computer source, used to adjust computer image [ Contrast, Brightness, Color
temp ., White balance (Red/Green/Blue), Sharpness and Gamma]. (p.39)
For video or HDMI source, used to adjust picture image [ Contrast, Brightness, Color,
Tint, Color temp ., White balance (Red/Green/Blue), Sharpness, Gamma, Noise
reduction and Progressive]. (pp.46-47)
⑤ Aspect For computer source, used to adjust size of the image [ Normal, Full, 16:9, Zoom, True,
Custom, Digital zoom +/–, Keystone, Ceiling, Rear, Screen aspect and Colorboard].
(pp.40-42)
For video or HDMI source, used to set size of image [ Normal, Full, 16:9, Zoom,
Natural wide, Custom, Keystone, Ceiling, Rear, Screen aspect and Colorboard].
(pp.48-49)
⑥ Sound Used to adjust the volume or mute the sound. (p.29)
⑦ Setting Used to set the projector’s operating configurations. (pp.52-64)
⑧ Information Display the input source information: Input, H-sync freq ., V-sync freq ., Aspect,
Language, Lamp status, Lamp counter, Power management mode, Key lock, PIN
code lock, Remote control, and SERIAL NO .. (p.65)
⑨ Network See user's manual of “Network Set-up and Operation”.
⑩ Guide The key operation is displayed.
Basic Operation
Main Menu