Canon Multimedia Projector LV-8235 UST - Manual (Page 35)

35
Computer Input
Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal position,
Vertical position and Clamp position to conform to your computer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–10) in
the PC System Menu (See page 34). See also “Store” on
page 37.
Note:
• Fine sync, Total dots, Horizontal position and
Vertical position of some computers can not be fully
adjusted with the Auto PC adjustment function. When
the image is not provided properly with this operation,
manual adjustments are required (pp.36-37).
• The Auto PC adjustment can not be operated when
480i, 575i, 480p, 575p, 720p or 1080i is selected in the
PC System Menu (p.34) , or when the signal is coming
from the HDMI terminal.
Press the MENU button to display the On-Screen
Menu. Use the Point  buttons to select PC adjust
and then press the Point  or the OK button.
1
2
Use the Point  buttons to select Auto PC and then
press the OK button.
Use Point  buttons to select Auto PC
and press the OK button.
Please wait . . . appears while the Auto PC
adjustment is in process.
Menu Operation
Auto PC