2. standard cmos setup – Curtis AR-B1682 User Manual

Page 36

Advertising
background image

~ Page 30 ~

4-2. STANDARD CMOS SETUP



The <Standard CMOS Setup> option allows you to record some basic system hardware configurations and
set the system clock and error handling. If the CPU board is already installed in a working system, you will
not need to select this option anymore.

BIOS: Standard CMOS Setup


Date & Time Setup
Highlight the <Date> field and then press the [Page Up] /[Page Down] or [+]/[-] keys to set the current date.
Follow the month, day and year format.
Highlight the <Time> field and then press the [Page Up] /[Page Down] or [+]/[-] keys to set the current date.
Follow the hour, minute and second format.
The user can bypass the date and time prompts by creating an AUTOEXEC.BAT file. For information on how
to create this file, please refer to the MS-DOS manual.

Floppy Setup
The <Standard CMOS Setup> option records the types of floppy disk drives installed in the system.
To enter the configuration value for a particular drive, highlight its corresponding field and then select the drive
type using the left-or right-arrow key.

Hard Disk Setup
The BIOS supports various types for user settings, The BIOS supports <Pri Master> and <Pri Slave> so the
user can install up to two hard disks. For the master and slave jumpers, please refer to the hard disk’s
installation descriptions and the hard disk jumper settings.
You can select <AUTO> under the <TYPE> and <MODE> fields. This will enable auto detection of your IDE
drives during bootup. This will allow you to change your hard drives (with the power off) and then power on
without having to reconfigure your hard drive type. If you use older hard disk drives which do not support this
feature, then you must configure the hard disk drive in the standard method as described above by the
<USER> option.

Boot Sector Virus Protection
This option protects the boot sector and partition table of your hard disk against accidental modifications.
Any attempt to write to them will cause the system to halt and display a warning message. If this occurs, you
can either allow the operation to continue or use a bootable virus-free floppy disk to reboot and investigate
your system. The default setting is <

Disabled

>. This setting is recommended because it conflicts with new

operating systems. Installation of a new operating systems requires that you disable this to prevent write

AMIBIOS SETUP - STANDARD CMOS SETUP

(C) 1999 American Megatrends, Inc. All Rights Reserved

Date (mm/dd/yyyy): Tue Jun 02,1998

640KB

Time (hh/mm/ss): 13:39:30

63MB


Floppy Drive A: 1.44MB 3 1/2
Floppy Drive B: Not Installed

LBA Blk PIO 32Bit

Type Size Cyln Head Wpcom Sec Mode Mode Mode Mode

Pri Master : Auto

Off Off Auto Off

Pri Slave : Auto

Off Off Auto Off

Sec Master Auto Off Off Auto Off
Sec Slave Auto Off Off Auto Off

Boot Sector Virus Protection Disabled

Month: Jan - Dec

ESC:Exit

:Sel

Day: 01 - 31

PgUp/PgDn:Modify

Year: 1901 - 2099

F2/F3:Color

Advertising