COBY electronic DVD938 - Manual (Page 19)

Page 18 Coby Electronics Corporation www.cobyusa.com Page 19
En
gl
ish
Connections
Audio System
Choose the best available audio connection. Avoid using more than
one connection at the same time to prevent signal interference. The
audio settings of the unit must match the audio connection used.
Change the audio settings in the System Setup menu (please refer to
the System Setup section of this manual for more information).
Speakers
This unit has an integrated amplifier. Connect the supplied speakers to
enjoy your movies with 5.1-channel surround sound!
If necessary, strip 3/8” (10 mm) of insulation from each end of the 1.
speaker wire.
While pressing the terminal levers of each speaker, insert the bare
2.
wire into the hole, then release the lever to secure the connection.