Save these instructions, Caution – Intex 633T Krystal Clear 2014 User Manual

Page 11

Advertising
background image

(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013

109

SAVE THESE INSTRUCTIONS

English

Page 11

POOL CARE AND CHEMICALS

CLEANING OR REPLACING FILTER CARTRIDGES

All pools require care to keep the water clear and hygienically clean. With proper chemical

control, your filter will help attain this objective. Consult your pool supply dealer for

instructions regarding the proper use of chlorine, algaecide and other chemical agents

required for sparkling clear water.

Keep pool chemicals away from children.

Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could

occur.

Daily pH checking and chemical treatment of the water is very important and can not be

overemphasized. Chlorine, algaecide and maintenance of proper pH levels are required

when filling the pool as well as during the season. Consult your local swimming pool supply

store for instructions.

The season's first filling of the pool may have brackish water requiring extra water

additives and extra filter changes. Do not allow swimming in pool until the pH level is

balanced. Consult your local swimming pool supply store for instructions.

Keep spare filter cartridges on hand. Replace cartridges every two weeks.

Chlorinated water may damage lawns, gardens or shrubbery as children play in the pool

and splash water outside the pool. Lawn areas underneath the pool liner will be destroyed.

Note that some types of grass may grow through the liner.

Filter run time depends on pool size, weather and usage level. Experiment with various run

times so as to produce clean clear water.

It is recommended that the filter cartridge be replaced at least every 2
weeks.

1. Make sure the filter pump is turned off, then disconnect the power cord from the electrical
outlet.
2. Turn both plunger valve handles fully clockwise until they stop. This closes the valve,

prevents the water from flowing out of the pool.

3. Gently turn the top air release valve once or twice in a counter-clockwise direction. The

housing cover can now be easily removed.

4. In a counter-clockwise direction remove the filter housing collar (1). Place it in a safe
location.
5. Remove the housing cover (4).
6.
Now remove the used filter cartridge.

CAUTION

Concentrated chlorine solutions may damage the pool liner. Always follow the
chemical manufacturer’s directions, and the health and hazard warnings.

Advertising