Save these instructions, Important, Led code chart – Intex CS8110 User Manual
Page 19
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
131
SAVE THESE INSTRUCTIONS
English
Page 19
LED CODE CHART
LED Reading
Definitions
80 Boost
Mode
00
Stand-By Mode (Start-up)
01
Minimum Operating Hour (1 hour remaining)
02
Operating Hours (2 hours remaining)
03
Operating Hours (3 hours remaining)
04
Operating Hours (4 hours remaining)
05
Operating Hours (5 hours remaining)
06
Operating Hours (6 hours remaining)
07
Operating Hours (7 hours remaining)
08
Operating Hours (8 hours remaining)
09
Operating Hours (9 hours remaining)
10
Operating Hours (10 hours remaining)
11
Operating Hours (11 hours remaining)
12
Maximum Operating Hours (12 hours remaining)
90
Alarm Code(Low Pump Flow/No Pump Flow)
91
Alarm Code (Low Salt Level)
92
Alarm Code (High Salt Level)
93
Stand-By Mode (Operating Process finished)
“BLANK”
No Power or “Power Saving Mode” waiting to start next
Saltwater System cycle.
IMPORTANT
When Code “90” alarm is shown, ensure the timer of the filter pump is set
one (1) hour longer than the Saltwater System.
If the filter pump does not have a built-in timer, the filter pump needs to
be turned on/off manually every day.