Jaypro Sports HFGP-3 - Manual (Page 2)

JAYPRO SPORTS
H-FRAME FOOTBALL GOAL POST, HFGP-3
LIST OF MATERIALS
PIECE NO. PART NO. DESCRIPTION QTY.
1 HFGP-3US UPRIGHT 4
2 HFGP-3XS CROSSBAR 2
3 EC0013 PVC CAP 4
4 HS2884 HEX HEAD SCREW ½”-13 x 1 ½” 8
5 HN268 HEX NUT ½”-13 8
6 HW2044 FLAT WASHER ½”-13 16
LIST OF SUGGESTED MATERIALS
1) FOUR (8 FT), TWO BY FOUR INCH PIECES OF LUMBER MAY STEADY
UPRIGHTS IN POSITION. ADDED GRAVEL (AFTER UPRIGHT IS IN
PLACE) MAY ALSO HELP WITH BRACING.
2) MOISTURE RETAINER. SEE #8 ON ASSEMBLY INSTRUCTIONS.
TOOLS REQUIRED: STANDARD SHOVEL OR MECHANICAL DIGGING
EQUIPMENT
A LEVELING DEVICE
(2) 9/16” SOCKETS WITH DRIVERS AND/OR 9/16”
OPEN-END WRENCHES
CONCRETE MIX, ASK DEALER FOR SPECIFICATIONS
SAFE USE AND HANDLING
DO NOT HANG FROM CROSSBAR OR CLIMB ON THIS UNIT. THIS IS
DANGEROUS AND THE ADDED WEIGHT MAY DAMAGE THE EQUIPMENT.
CRITICAL REFERENCE DIMENSIONS
1) FROM GROUND LEVEL TO TOP OF CROSSBAR IS 10’-0”.
2) DEPTH OF FOOTING HOLE IS 5 FEET. CONCRETE MIX TO EQUAL 4000
PSI.
3) TOP OF CONCRETE FOOTING IS RECESSED 8” BELOW GROUND
SURFACE.
ASSEMBLY INSTRUCTIONS
NOTE: WE RECOMMEND TWO PEOPLE ASSEMBLE THIS UNIT.
1) LAY OUT AND MARK DIMENSIONS FOR EXACT PLACEMENT OF
UPRIGHTS. SEE DRAWING INCLUDED FOR ILLUSTRATION AND
OFFICIAL DIMENSIONS.
2) IMPORTANT STEP: PLACE PVC CAPS ON TOP OF UPRIGHTS. SEE
DRAWING INCLUDED.