Jaypro Sports FBGP-430C - Manual (Page 13)

Installing the Jaypro Max-1 Football Goal Posts
www.jaypro.com REV-
12
9.2
Installation of Second Upright and End Fitting
1. Repeat steps 1 through 9 of section 9.1 above for the other end fitting and
upright.
2. Confirm level of crossbar and plumbness of both uprights, adjust as necessary.
3. Drill second hole in end fitting in manner described above, using the other hole
in crossbar as a guide.
4. Install 1/2"-13 x 7-1/2” hex bolt, washers, and nut.
5. Confirm level of crossbar and plumbness of both uprights, adjust as necessary.
6. Drill second hole in upright insert in manner described above, using the
remaining hole in upright as a guide.
7. Install 1/2"-13 x 5” hex bolt into hole.
9.3
Complete Installation of First Upright and End Fitting
1. Confirm level of crossbar and plumbness of both uprights, adjust as necessary.
2. Repeat steps 1 through 7 in section 9.2 above for other upright and end fitting.
3. Tighten all bolts in end fittings and uprights as much as possible.