Jaypro Sports FBGP-430C - Manual (Page 3)

Installing the Jaypro Max-1 Football Goal Posts
www.jaypro.com REV-
2
ƒ 20-foot high scaffold (or scissor lift or boom)
ƒ 10-foot (minimum) high step ladder
ƒ Mechanic’s tool set
ƒ Level, 3’ minimum
ƒ 100-foot tape measure
ƒ Electric Drill
ƒ Drill Bits:
o 5/16“, 1/2", and 5/8” bits
ƒ Rubber mallet
The following equipment is optional, but strongly recommended:
ƒ
17/32”, 21/32”, and 11/16” transfer punches (highly recommended)
ƒ 3/16”, 3/8” drill bits to pilot holes (highly recommended)
ƒ Heavy grease or white lithium grease
ƒ Baling wire (if using rebar)
ƒ (6), 54-inch lengths of 5/8-inch rebar
4 Check Components
Goal posts are sold in pairs. Inspect your goal post shipment and ensure you received
these parts:
Parts List
2 Goosenecks
2 Anchor Kits
2 Crossbars
4 Twenty (or thirty)-foot uprights
4 Upright end fittings
4 Wind socks
Yellow spray paint
Check Figure 1 to confirm that your Goal Post has shipped with all hardware. If any
hardware or components are missing, contact the Jaypro Sports customer support
team, Monday through Friday, 8:00 A.M. to 5:00 P.M. Eastern Time at 1–800–243–
0533 for replacements.