Mini-trip computer — if equipped – Jeep 2011 Compass User Manual

Page 207

Advertising
background image

28. 4WD! Warning Light — If Equipped

This light monitors the 4-Wheel Drive (4WD)
system. The light will come on, for a bulb
check, when the ignition key is turned to the
ON/RUN position and may stay on for as long

as three seconds.

When lit solid:

There is a 4WD system fault. 4WD

performance will be at a reduced level. Service the 4WD
system soon.

When blinking:

The 4WD system is temporarily dis-

abled due to overload condition.

29. Electronic Vehicle Information Center (EVIC)
Display — If Equipped
When the appropriate conditions exist, this display
shows the EVIC messages.

For further information, refer to “Electronic Vehicle In-
formation Center (EVIC)”.

30. Hill Descent Indicator — If Equipped

The symbol illuminates (is armed) when the
4WD Lock switch is activated and the trans-
mission range indicator is in LOW or REVERSE
position (Off-Road Mode).

MINI-TRIP COMPUTER — IF EQUIPPED

The Mini-Trip Computer is located in the instrument
cluster and features a driver-interactive trip information
and temperature display.

NOTE:

The system will display the last known outside

temperature when starting the vehicle and may need to
be driven several minutes before the updated tempera-
ture is displayed. Engine temperature can also affect the
displayed temperature; therefore, temperature readings
are not updated when the vehicle is not moving.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

205

Advertising