Power transfer unit (ptu) – awd/4wd models only, Appearance care and protection from corrosion, Power transfer unit (ptu) – awd/4wd – Jeep 2011 Compass User Manual

Page 426: Models only, Appearance care and protection from, Corrosion

Advertising
background image

Frequency Of Fluid Change
Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

Power Transfer Unit (PTU) – AWD/4WD Models
Only

Lubricant Selection
Use only the manufacturer’s recommended fluid. Refer
to “Fluids, Lubricants, and Genuine Parts” in “Maintain-
ing Your Vehicle” for further information.

Fluid Level Check
Visually inspected the unit at each oil change for leakage.
If leakage is detected, Check the fluid level by removing
the fill plug. The fluid level should be maintained be-
tween the bottom of the fill hole to 1/8 in (4 mm) below
the fill hole.

Add fluid, if necessary, to maintain the proper level.

Frequency Of Fluid Change
Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

Appearance Care And Protection From Corrosion

Protection Of Body And Paint From Corrosion
Vehicle body care requirements vary according to geo-
graphic locations and usage. Chemicals that make roads
passable in snow and ice and those that are sprayed on
trees and road surfaces during other seasons, are highly
corrosive to the metal in your vehicle. Outside parking,
which exposes your vehicle to airborne contaminants,
road surfaces on which the vehicle is operated, extreme
hot or cold weather and other extreme conditions will
have an adverse effect on paint, metal trim, and under-
body protection.

The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
resistance built into your vehicle.

424

MAINTAINING YOUR VEHICLE

Advertising