JXD M500 - Manual

Thank you for purchasing JXD product!
For better enjoying it, we highly recommend you to read the following information before starting to use it.
Notice: please power off the device before connecting with USB cable, then turn it on. Otherwise it will
influence the device’s function. Other USB cables than the provided USB cable should not be used.
M500 NOTIFICATION
Basic functions
video: ASF(MPEG-4), AVI(Divx,Xvid), 3GP and MP4
Audio: MP3, WMA, WAV and AAC etc.
Photo: JPEG format
Built-in Microphone / Line-in recording.
Video recording - AV in.
TV output (NTSC/PAL)
Calendar, Calculator and Game download.
E-book and English-Chinese Dictionary
Multi-languages
TF card slot
Built-in Li-ion battery.
Built-in speaker.
DC and DV
FM
PC Environment Requirement
1.Minimum PC Environment requirement
WIN98/ME/2000/XP, IBM compatible PC
Pentium 166MHz or above
USB port
32MB memory (64MB for WIN2000) or above
20MB hard disk space
CD-ROM Drive
Sound card
Available for internet
2.Connect your device to PC
Connect your device to your PC via USB cable (provided in the accessories) correctly.
Power on your device;
Press " +/- " or " >>I / I<< " to move the cursor and select "VIDEO", "AUDIO", "PHOTO", "CAMERA",
"DV", "RECORD", "GAME", "LEARNING", "TOOL", "SETUP", "FM", "TV-IN", "LINE-IN" and "RESOURCE"
and press " >II " to confirm.
Power on your device;
Select VIDEO icon by " >>I / I<< " button, and press " >I " to confirm;
Press " >>I / I<< " to select video page up or page down, press " +/- " to select the target video, then
press " >II " to play;
While playing video, press " +/- " to adjust the volume, press " >>I / I<< " to FF or FW, press " >II " to
play or pause, press "ESC" or "MENU" to display the play bar, press "MENU" to open/close the volume
and press "ESC" to exit;
Press "MENU" to pop up setting interface, press " +/- " button to select "Disp Mode", "Loop Mode", "
File Protect", "Del File", "TV Output" and "Exit", press " >>I " to enter into submenu, press " I<< "
back to main menu. press " +/- " to move the optional up/down, press " >II " to confirm and press
"ESC" to cancel and exit.
BASIC FUNCTIONS and PC ENVIRONMENT REQUIREMENT M500
OPERATION DETAILS / VIDEO M500 M500
M500 M500
M500
OPERATION DETAILS / VIDEO
AUDIO PHOTO
USER MANUAL
M500
BUTTON AND CONNECTOR
AVOID leaving your device in high temperature, high humidity or dusty air-environment.
AVOID leaving your device inside vehicles with closed windows in hot summer particularly.
AVOID crushing your device with any hard objects, which may causes its surface scratches or some
hardware damage. Don’t disassemble your device individually.
DON’T use your device when very dry environment to avoid static impacts.
DON’T use your device when driving to avoid traffic accidents.
MUST insert or pull out the TF card in power-off status to avoid unpredictable damage to your device
caused by transient current.
DON’T disconnect your device from computers while formatting system or download/upload files,
which may cause program errors.
DON’T leave your device near children.
JXD is not responsible for the lost of your data in your device under any circumstances.
JXD will not inform its customers for any modification of software of product introduction in advance,
and JXD’s interpretation shall prevail in the precondition of obeying the local laws.
Power on - Press Power button for long.
Power off - Press Power button for 3 seconds .
Charge – Connect USB cable till seeing instruction light is red. The usual charging time is around 5
hours, and JXD recommends you to charge your device in power off status.
Notice: The instruction light is on in green at charging status and off when battery is full, then you can
tear off the USB cable to start using the device.
Display mode
Recycle mode
File protection
File delete
AV out
Exit
List
Thumbnail
Current
All
Random
Lock
Unlock
Current
All
LCD output
NTSC SYS output
PAL SYS output
Main menu Submenu
VIDEO
Press " >>I " to enter
into submenu
Press " I<< " back to
main menu
Press " +/- " to move up/down, press " >II " to confirm and press "ESC" to exit.
Video output:
Connect your device and TV through the AV cable, select PAL or NTSC output mode for best signal, press
" +/- " to select the system to match your TV then press " >II " to confirm. Back to main menu, select the
video you want to play and press" >II " to play, then you will see the device screen turns black and your
video playing on the TV. Press "ESC" to exit and back to video main menu.
Power on your device.
Select AUDIO icon by " >>I / I<< " button, and press " >II " to confirm.
Press " >>I / I<< " to select audio page up or page down, press " +/- " to select the target audio, then
press " >II " to play and again to pause.
While playing video, press " +/- " to adjust the
volume, press "MENU" to select among "Randomly",
"Circularly" and "Orderly", press " >>I / I<< " to FF
or FW, press " >II " to play or pause and press "ESC"
to exit.
Press "MENU" to pop up setting interface, press
" +/- " button to select "Loop Mode", "File Protect",
"Del File", "EQ mode" and "Exit", press " >>I " to
enter into submenu, press " I<< " back to main
menu, press " +/- " to move the optional up/down,
press " >II " to confirm and exit and press "ESC"
to cancel and exit.
Main menu
Loop Mode
File Protect
Del File
EQ mode
Exit
Press " >>I " to
enter into submenu
Press " >>I " back
to main menu
Submenu
Current
All
Random
Lock
Unlock
Current
All
Normal
dbb
rock
jazz
pop
live
Music playing interface
Press "MENU" to switch control, press " +/- " to move up/down, press " >II " to confirm.
Notice:
Lyric displays synchronously while playing music: Download LRC format file
(in the same name of your song), put it in the same folder of the music (e.g.:ABC.MP3 and ABC.LRC).
Always save music and lyric files in "/AUDIO"folder.
Power on your device.
Select PHOTO icon by " >>I / I<< " button, and press " >II " to confirm.
Press " >>I / I<< " to select picture page up or page down, press " +/- " to select the picture, and
press " >II " to display in full screen, while displaying pictures, press " +/- " to FF or FW.
Press "MENU" to pop up setting interface, press " +/- " button to select "Disp Mode", "File Protect",
"Del File", "TV Output" and "Exit", press " >>I " to enter into submenu, press " I<< " back to main
menu, press " +/- " to move the optional up/down, press " >II " to confirm, and press "ESC" to cancel
and exit.
Main menu
Disp Mode
File Protect
Del File
TV Output
Exit
Press " >>I " to
enter into submenu
Press " >>I " back
to main menu
Submenu
Thumbnail
List
Slide
1s
2s
Lock
Unlock
Current
All
LCD Output
NTSC Output
PAL Output
TF slot
Power on/ off
VOL- VOL+
MENU
Previous
Next
Play
USB Slot LINE-IN
AV IN
AV-OUT
Earphone