JXD P300 - Manual

P300
P300
P300
P300
P300
P300
P300 P300
1
2 3
4 5
6 7
1.The battery can reach its best performance after two to three times’ throughly charge and discharge.
2.The battery should be charged for 8 to 10 hours at the first three time and then 4 hours’charging can be
full, which make the batter reach its highest performance.
3.PLEASE backup your information before upgrading or formating.
4.DON’T dissemble the device.
5.AVOID fiercely collision.
6.AVOID leaving your device in high temperature, high humidity, dusty air-environment, magnetic field
and explosion in the sunlight.
7 AVOID washing the device with chemical solution.
8.AVOID leaving the device beside liquid.
9.PLEASE choose proper volume, avoiding hearing loss.
10.DON’T change anything of the device.
11.PLEASE use the specified battery, adaptor and accessories. Other accessaries go against the warranty
regulations and are dangerous.
12.PLEASE settle the device and accessories according the the native environment regulations.
13.PLEASE contact the native distributors and service center when the device has problems.
14. JXD will not inform its customers for any modification of software of product introduction
in advance, and JXD’s interpretation shall prevail in the precondition of obeying the local laws.
.
NOTICE
Thank you for purchasing JXD MID product!
For better enjoying it, we highly recommend you to read the following information before starting to
use it. The version of this User’s Manual is Ver1.0.
MENU
I.SPECIFICATIONS
II.BUTTON FUNCTIONS INTRODUCTIONS
III.GUIDANCE
1.Start the Device
2.File Transfer
3.Functions
(1). WiFi (2). 3G (3).Bluetooth
(4). Music (5). Video (6). Gallery
(7). Camera (8). Light Sensor (9). Recording
10). G-Sensor (11). Application Download and Use
VI.CHARGING STEPS
1. Charge with MIC-USB
V.REBOOT
PROBLEM SHOOTINGS
(
I. SPECIFICATIONS
MODEL P300
FLASH 4GB
DDR 512MB
USB micro USB
SCREEN 7.0 inch; Resolution: 1024×600
BATTERY Rechargable Li-ion Battery 4000mA/h
SIZE 200.3mm(L)*151.45mm(W)*9.4mm(H)
II.BUTTON FUNCTION INTRODUCTIONS
Back Back to the previous page
POWER Wake up the device and long press it to power off the device
Volume+/- Adjust the volume
● :
● :
● :
● :
● :
● :
● :
:
:
:
:
1. Start the device
Long press the POWER button to power on and enter into the main interface.
2.File Transfer
Connect the device to the PC with the USB Cable(Turn on USB Storage), copy the needed music/video/file
in your PC to your MID disk.
GUIDANCE GUIDANCE
GUIDANCE
3. Functions
1). WiFi
In the “Settings”, turn on WiFi and click Scaning to choose the availble networks,and then put in the right
code to connect to the WiFi.
(
(2). 3G Networks and Phone Call
Insert 3G(WCDMA) or GSM card, then enter into Settings menu, choose Mobile Networks(default open)
until signal icon appeared in the right bottom, it is connected successfully. Then you can use the mobile
networks and make phone calls.(Turn off the WiFi before connecting 3G. ) (3). Bluetooth
In the Settings, turn on Bluetooth, then automatically scanning bluetooth devices and after aired, you can
transfer/accept files.
GUIDANCE
SPECIFICATIONS
User Manual