Canon IMAGE RUNNER 5065 - Manual (Page 102)

Setting Up a Computer for Printing/Sending a Fax 3-56
3
Usin
g a
TCP/IP Netw
or
k
IMPORTANT
• Up to three clients can be logged in simultaneously to its FTP server.
• You cannot perform manipulation of files (changing file names, deleting, etc.) on
the FTP server by using FTP commands.
Printer Connection Method (WSD)
The following procedure describes how to perform printing with WSD when using
Windows Vista.
If a dialog box is displayed while you are performing this procedure, enter a user
name and password. For more information, see the documentation provided with
Windows Vista.
IMPORTANT
IPv6 is not supported.
1
Check the settings for <RX/Print Range> in [IP Address Range
Settings] on the IPv4 Settings screen to see whether the IPv4
address of the computer in which a driver is to be installed is
permitted. For details, see step 17 in "TCP/IP Settings (IPv4),"
on p. 3-3.
IMPORTANT
• If the settings for <RX/Print Range> in [IP Address Range Settings] on the IPv4
Settings screen do not permit the IPv4 address, you cannot install a driver.
• If the IPv4 address of the computer is beyond the range of the permitted IPv4
addresses set for <RX/Print Range> after installing a driver, you cannot print or
send a fax from the computer.
2
Install the driver.
● Using Windows Explorer
❑
With Windows Explorer, right-click the printer icon you want to use ➞ select
[Install].
● Using the Add Printer Wizard
❑
Start the Add Printer Wizard
➞ select a network printer.