Compaq P700 - Manual (Page 12)

1-10 English
Part Number:380213-001 - Writer: JD Poteet- Saved by: JD Poteet
Pages: 15 Words: 2558 Saved date: 07/23/99 5:00 PM File Name: Andretti
Adjusting Screen Quality
The optimum screen settings are factory preset. However, to change the
settings to your personal preference, allow the monitor to warm up for
30 minutes before performing the following procedures. The screen
image stabilizes after a warm-up period.
Optimizing Contrast
For best results, set your screen to a light background (such as the
Windows Desktop) before adjusting the following settings:
1. Set the brightness control to its maximum setting, then reduce the
brightness to your preference.
2. Adjust the contrast setting to your preference.
Optimizing Focus
The default image size is preset at the factory. The front panel controls
can be used to increase the screen size beyond the default setting.
However, expanding the screen image beyond the default settings may
degrade the focus at the outer edge of the screen.
To enhance focus, use the lowest brightness and contrast levels that
provide satisfactory results in your viewing environment.
✎
Settings that maximize contrast may not offer optimum focus,
and settings that maximize focus may not offer optimum contrast.