Compaq P700 - Manual (Page 16)

1-14 English
Part Number:380213-001 - Writer: JD Poteet- Saved by: JD Poteet
Pages: 15 Words: 2558 Saved date: 07/23/99 5:00 PM File Name: Andretti
Care and Maintenance
This section explains how to care for and maintain your Compaq
monitor during normal everyday use.
Protecting the Monitor
To protect your monitor from overheating and other types of damage,
follow these suggestions:
?# Use only a power source and connection appropriate for this
monitor, as indicated on the marking label/back plate.
?# If an extension cord or power strip is used, make sure that the cord
or strip is rated for the product and that the total ampere ratings of
all products plugged into the extension cord or power strip do not
exceed 80% of the extension cord or strip ampere ratings limit.
?# Do not overload an electrical outlet, power strip, or convenience
receptacle. The overall system load must not exceed 80% of the
branch circuit rating. If power strips are used, the load should not
exceed 80% of the power strip input rating.
?# Install the monitor near an outlet that you can easily reach.
Disconnect the product by grasping the plug firmly and pulling it
from the outlet. Never disconnect it by pulling the cord.
?# Unplug the monitor from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners.
?# Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered. Never push
objects of any kind into cabinet slots or other openings.
?# Do not place plants on top of the monitor. Water or dirt from the
plant may fall into the vents.
?# Do not drop the monitor or place it on an unstable surface.
?# Do not allow anything to rest on the power cord. Do not walk on
the cord.