Settings, Voice/tone setting – Cobra Electronics XRS9430 User Manual

Page 9

Advertising
background image

To Turn VG-2 and Spectre 1 Alerts On and Off

While no signal
is being detected,
press and hold
the Dim button
for two seconds
again.

Tone

Voice

Visual Display

Two beeps

Spectre
VG-2 On

V

will blink twice

in the display

To Turn K Band On and Off

While no signal
is being detected,
press and hold both
the Dim and City
buttons for two
seconds.

Tone

Voice

Visual Display

Two beeps

K On

K

will blink twice

in the display

Mute Button

Press and hold for

two seconds

Settings

Intro

Operation

Customer

Assistance

Warranty

Notice

Secondary Icons

Your Detector

Nothing Comes Close to a Cobra

®

13

Settings

Intro

Operation

Customer

Assistance

Warranty

Notice

Secondary Icons

Your Detector

12 English

VG-2, Spectre 1 Alert Audio Settings, K & Ku Band Detection

The detector is undetectable by police VG-2 and Spectre 1 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts.
The factory setting is VG-2 and Spectre 1 alert off.

Voice/Tone Setting

You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.

In Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only.
The factory setting is Voice Alert mode.

To Change From Voice Alert to Tone Alert

While no signal
is being detected,
press and hold
the Mute button for
two seconds.

Tone

Voice

Visual Display

One beep

Tone Alert

None

To Change From Tone Alert Back to Voice Alert

While no signal
is being detected,
press and hold
the Mute button
for two seconds
again.

Tone

Voice

Visual Display

None

Voice Alert

None

Dim Button
Press and hold
for two seconds

On/Off Indicator

X K Ka

V

S

c

To Turn Ku Band* On and Off

While no signal
is being detected,
press and hold
the City button
for two seconds
again.

Tone

Voice

Visual Display

Two beeps

Ku On

X

and

K

will blink

twice in the display

K

will blink once

in the display

One beep

K Off

Ku Off

X

and

K

will blink

once in the display

One beep

* The new Ku band may be introduced to North America in

the future. To prevent false alerts until it is, the factory default
for Ku band detection is off.

Spectre
VG-2 Off

V

will blink once

in the display

One beep

Advertising