Clipcomm CWP-100 User Manual

Page 27

Advertising

8.3.7. Firmware Management

You can return to the factory reset or update the firmware.

①

Select “7: Firmware” to check the current firmware version.

1: Load Default

2: Firmware Ver.

3: Firmware Update

4: Update Server

②

Select “1: Load Default” to return to the factory reset.

③

Select “2: Firmware Ver.” to check the current version.

④

Select “3: Firmware Update” to update the firmware from the assigned server.

⑤

Select “4: Update Server” to set the server for updating the firmware.

8.3.8. Call Forwarding

You can forward the incoming call to the previously assigned phone number.

①

Follow the steps as Menu ”4: Extra Setting” ”8: Call Forwarding”.

1: Setting
2: Forward NUM

②

Select “1: Setting” and then choose the conditions for enabling the call forwarding functions.

1: Disable
2: Unconditional
3: Busy
4: No Answer

③

Select “2: Forward NUM” and then input the phone number to forward the call.

④

Once you enable the call forwarding function, the CWP-100 will display “CallForward ON” on the
LCD main screen.

8.3.9. Vibration Mode

You can change the CWP-100 to vibrate instead of the melody ring for the incoming call.

①

Press

for three seconds to change to the vibration mode.

②

Once the vibration mode is enabled, the CWP-100 display

icon on the LCD.

Advertising