Canon DR-4080U - Manual (Page 37)

35
Loading the flatbed for repeated scanning
The ADF is heavy. When you need to use the flatbed for scanning many pages, separate the ADF from the
document cover.
1
Separate the ADF from the docu-
ment cover.
➀
Pull out the exit document stop-
per in the direction of the arrow.
➁ Under the hopper pull up the front
door release. The ADF separates
from the document cover.
➂
Raise the ADF completely to
separate it from the document
cover.
2
Follow the steps in the previous
section to load the original on the
flatbed for scanning. (
➞ 33 to 34)
When you are finished scanning,
close the document cover slowly.
3
Close the ADF.
With your hands on both sides of the
ADF, press down slowly and gently with
even pressure on both sides until you
hear it lock in place.
Caution! To avoid damaging the hopper
extension tray, never press down on the
hopper extension tray to close the ADF
door.
Operating the scanner
ADF
Document cover
Exit document stopper
Front door release
Hopper