Cisco OL-21851-01 - Manual (Page 12)

5-12
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring and Managing the Cisco Unified IP Phone
Configuring the Cisco Unified IP Phone
Gratuitous ARP Yes Disabled. Indicates whether the phone will learn MAC
addresses from Gratuitous ARP responses.
Disabling the phones ability to accept Gratuitous
ARP will prevent applications which use this
mechanism for monitoring and recording of voice
streams from working. If monitoring capability is
not desired, change this setting to Disabled.
PC Voice VLAN Access Yes Enabled. Indicates whether the phone will allow a device
attached to the PC port to access the Voice VLAN.
Disabling Voice VLAN Access will prevent the
attached PC from sending and receiving data on the
Voice VLAN. It will also prevent the PC from
receiving data sent and received by the phone. Set
this setting to Enabled if an application is being run
on the PC that requires monitoring of the phones
traffic. These could include monitoring and
recording applications and use of network
monitoring software for analysis purposes.
Video Capabilities Yes Disabled. —
Auto Line Select Yes Disabled. When enabled, indicates that the phone will shift the
call focus to incoming calls on all lines. When
disabled, the phone will only shift the focus to
incoming calls on the currently used line.
Web Access Yes Choose Enabled.
Note If you are using
Cisco Unified CM
firmware release 8.0
and wish to enable
MIDlets features on
new phone
installations, you
must first enable this
field.
Indicates whether the phone will accept connections
from a web browser or other HTTP client. Disabling
the web server functionality of the phone will block
access to the phones internal web pages. These pages
provide statistics and configuration information.
Features, such as QRT (Quality Report Tool), will
not function properly without access to the phones
web pages. This setting will also affect any
serviceability application such as CiscoWorks 2000
that relies on web access.
Days Display Not Active — Choose a day of the week. Allows the user to specify the days that the backlight
is to remain off by default. Typically this would be
Saturday and Sunday for US corporate customers.
Saturday and Sunday should be the default. The list
contains all of the days of the week. To turn off
backlight on Saturday and Sunday the User would
hold down Control and select Saturday and Sunday.
Table 5-9 Product Specific Configuration Layout Fields (continued)
Field Required? Setting Description