Panasonic SPX900 - Manual (Page 81)

81
6
6-7-3 Deleting Voice Memos
1
Perform Steps
1
to
4
in the [6-7-1 Playing Back Voice
Memos] section to select the voice memo in the clip.
2
Move the pointer over the clip you want to delete, and press
the MENU BAR button. The pointer moves to the menu bar.
3
From the menu bar, select OPERATION  DELETE.
YES and NO appear to confirm deletion. Use the cursor
buttons and the SET button to select YES.
The voice memo is deleted.
6-8 Deleting Clips
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Use the cursor buttons to move the pointer over the clip you
want to delete.
Press the SET button to select the clip.
3
Press the MENU BAR button and select OPERATION 
DELETE from the menu bar.
4
The following screen appears. Use the cursor buttons and
the SET button to select YES.
5
The clip is deleted. All selected clips (in blue-green frames)
are deleted by this operation.
6-9 Restoring Clips
Restores clips that are defective as a result of sudden powering-
down during recording, or removal of the P2 card being
accessed.
<Note>
Only those clips with yellow corrupt clip markers can be
restored. Delete the clips with red corrupt clip markers. If the clip
cannot be deleted, format the P2 card.
During restoration of the clips, however, the defective-clip
indicator may change from yellow to red, resulting in inability to
restore the clips.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Use the cursor buttons to move the pointer over the clip you
want to restore (defective clips are indicated by corrupt clip
marks).
Press the SET button to select the clip.
3
Press the MENU BAR button, and select OPERATION 
REPAIR CLIP from the menu bar.
4
The confirmation window appears. Use the cursor buttons
and the SET button to select YES.