Installing the scanner and connecting to a network, Connecting the ac adapter, Connecting the network cable – Canon SCANFRONT 300 User Manual
Page 17: Installing the scanner and connecting to, A network
Advertising
11
3.
Installing the Scanner and Connecting to a Network
Before setting up the scanner, you need to move it to the installation site, and connect the AC adaptor and network cable.
IMPORTANT
For information on installation safety, see p. 3.
❏ Connecting the AC Adapter
Follow the procedure shown below to connect the AC adapter.
CAUTION
Make sure to use only the AC adapter and power cord included with the scanner.
a Connect the power cord and AC adapter.
b Insert the plug of the AC adapter into the power connector.
c Connect the power cord to the wall outlet.
❏ Connecting the Network Cable
Insert the network cable connector (RJ-45) into the LAN port.
The shape of the power plug
varies by country and region.
Advertising