Supplied applications, Scanfront service, Scanfront administration tool – Canon SCANFRONT 300 User Manual
Page 27: Scanfront service scanfront administration tool, Supplied applications (see p. 21)
21
7.
Supplied Applications
The following applications are included on the supplied INSTRUCTIONS AND UTILITIES CD-ROM.
❏ ScanFront Service
ScanFront Service is software that supplements the
network functions of the ScanFront. By installing the
software onto a computer on the same network as the
ScanFront, you can send scanned images from the
ScanFront to devices for which direct transfer would be
otherwise disabled (printers, computers on a different
segment, etc.).
Double-click the installer located in the following folder
on the INSTRUCTIONS AND UTILITIES CD-ROM to
install the software.
For Windows 7, Windows Vista, or Windows Server
2008:
Q:\ScanFrontService\Vista and 2008Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
For Windows XP or Windows Server 2003:
Q: \ScanFrontService\XP and 2003Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
For details on operations, refer to the separate ScanFront
300/300P INSTRUCTIONS (electronic manual).
❏ ScanFront Administration Tool
ScanFront Administration Tool is software that allows you
to manage multiple ScanFront scanners at one time. This
software allows you to perform operations such as
checking the current status of the ScanFront scanners on
the network, configuring ScanFront settings, managing
users, and backing up and restoring configuration data.
To use the software, install it on a computer connected to
the same network as the ScanFront scanners. Double-click
the installer in the following folder on the
INSTRUCTIONS AND UTILITIES CD-ROM to install
the software.
For Windows 7, Windows Vista, or Windows Server
2008:
Q:\AdministrationTool\Vista and 2008Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
For Windows XP or Windows Server 2003:
Q: \AdministrationTool\XP and 2003Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
For details on operations, refer to the separate ScanFront
300/300P INSTRUCTIONS (electronic manual).