CDA HVG95 - Manual (Page 14)

14
ENAMELLED PARTS
✓
All the enamelled parts must be washed only with a sponge with soapy water or
other non-abrasive products.
✓
Dry preferably with a soft cloth.
✓
If acid substances such as lemon juice, tomato conserve, vinegar etc. are left on
the enamel for a long time they will etch it, making it opaque.
STAINLESS STEEL SURFACES (some models only)
✓
Stainless steel parts should be rinsed with water and dried with a microfibre or
soft cloth.
✓ For persistent dirt, use specific non-abrasive products available commercially or a
little hot vinegar.
✓
Note: regular use will cause discolouring around the burners, because of the high
flame temperature.
GAS TAPS
✓
Regular lubrication of the gas taps must only be performed by specialised engineers.
✓
If the gas taps are not working properly call the After-Sales Service.
CONTROL KNOBS
✓
The control knobs may be removed for cleaning but care should be taken not to
damage the seal.