Using the scan panel – Canon DR-2510M User Manual

Page 55

Advertising
background image

Back

Previous Page Next Page

Contents

55

7

Click [OK] to close the [Register/Edit/Delete] dialog box.

NOTE

You can register up to 99 jobs.

To edit the settings of a registered job, select the job and click [Create/Edit].

To delete a registered job, select the job to delete and click [Delete].

Executing Scan Jobs

1

Select a job title from the list box in the job registration toolbar.

2

Place the documents into the scanner.
For details on placing documents, see "Placing Documents"’ on p. 24.

3

Select [Scan Job] from the [Scan] menu.

Scanning begins according to the registered job settings.

3. Using the Scan Panel

If Feeding Option in the scan settings is set to [Panel-Feeding] or [Automatic
Feeding], the Scan Panel will appear when you start scanning.

The Scan Panel has the following functions.

cStart button (Continue scanning)

If Feeding Option is set to [Panel-Feeding], clicking this button starts scanning.

dStop button (Finish)

Stops scanning.

eJob display

When the Start and Stop functions are assigned to the job buttons, [Start]
([Continue scanning]) and [Stop] ([Finish] button) are shown here.
If nothing is shown on the job display, the Start and Stop functions are not
assigned to the job buttons. In this case, you should use the Start and Stop
buttons on the Scan Panel.

fBatch separation button (Only for Windows)

After selecting [Panel] as the batch separation setting on the [Others] tab, if you
enable batch separation from the application and start scanning, this button
becomes active when scanning of the current document completes, and
scanning stops. When clicked, this button depresses and remains depressed
while scanning with batch separation continues, until scanning of the current
document completes, and scanning stops. The button then returns to normal.

c

b

a

d

a

b

c

Advertising
This manual is related to the following products: