Canon DR-2510M - Manual (Page 63)

Back Previous Page Next Page
Contents
63
NOTE
If you are using a TWAIN driver, the two extra settings below are displayed on the
[Basic] tab and [Image processing] tab. Refer to the Help for details.
-[Basic] tab: Scan options
-[Image processing]: Black/white reversion
Scanner driver settings screen under Mac OS X
The Scanner driver settings screen under Max OS X has a Simple Mode and an
Advanced Mode. (In the default condition after installation of the scanner driver, the
screen will open in Simple Mode.) You can switch between modes by clicking the
tabs at the top of the properties screen.
IMPORTANT
•
If you switch modes, any settings configured up to that point will be discarded.
•
If the TWAIN driver settings screen is called from CaptureOnTouch, the
screen is always in Advanced Mode. You cannot switch to Simple Mode.
Simple Mode Advanced Mode