Canon DR-2510M - Manual (Page 44)

Back Previous Page Next Page
Contents
44
[Button assignment] tab
Configure settings to assign the job to a job button on the scanner. If
[Assign scanner button 1 to Scan First] is selected in the main screen,
assignment to job button 1 is not available.
4
Click the [OK] button.
The job is registered according to the configured settings and appears in
the job list.
To confirm the settings of a registered job or to change the settings, click
the [Job list/edit] button.
1
Place the document in the scanner.
2
Click the [Select Scan Job] tab.
The main screen for [Select Scan Job] appears.
3
Click a job in the [Job list].
Selecting Scan Jobs