Philips 30PW8502-37 - Manual (Page 11)

How TO U se the T imer M enu C ontrols
~\Zour television comes with an onscreen clock. The
A. TV can also be set to turn on or ojf at a specific
time and tune to a specific channel when it powers
itself on.
ss^ Press the CLOCK button on the remote con-
^ trol to display the Timer onscreen menu.
Press the CURSOR UP or CURSOR DOWN
button to highlight one of the Timer controls.
These controls are Time, Start Time, Stop Time,
Program No., Activate, Display, and AutoChron.
Press the CURSOR RIGHT button to display
t.'! M the menu for the selected item.
Make adjustments to the selected items hy fol­
lowing the steps helow.
Time: Enter the current time using the
Numbered buttons. Use the CURSOR UP and
CURSOR DOWN buttons to toggle the AM and
PM setting.
Start Time: Use the numbered buttons to enter
the time you want the TV to turn itself On. Use
the CURSOR UP and CURSOR DOWN but­
tons to toggle the AM and PM setting.
Stop Time: Use the numbered buttons to enter
the time you want the TV to turn itself Off. Use
the CURSOR UP and CURSOR DOWN but­
tons to toggle the AM and PM setting.
Program No.: Use the NUMBERED buttons or
the CH
-I- or CH- buttons to enter the desired
start-up channel. You can also press the CUR­
SOR RIGHT or CURSOR LEET buttons to
enter the desired start-up channel.
Activate: Set the timer to turn itself On (Once
or Daily) or Off. Press the CURSOR UP or
CURSOR DOWN buttons to select Once, Daily,
or Off.
Display: Press the CURSOR RIGHT or CUR­
SOR LETT to toggle between On or Off. If On
is selected, the time will be displayed all the
time when the TV is on. When Off is selected,
the time will only appear when the
STATUS/EXIT button is pressed.
AutoChron: Eor use of the AutoChron feature,
refer to the section on “How to Use the
AutoChron Control” see next page.
Press the STATUS/EXIT button to remove the
menu from the screen.
CR
3at line
CR
3 q) litre ^
CR
Rpganlh g § 12 i®
CR
Alnete Of
AlKele «-G§ ^
CR
^ Cff Ot ®
CR
' A/l
AioOrcn l№
TrreZre
CET
O hte I
Refer to the next page for
details about how to use
the AutoChron control.