How to use the timer menu controls (cont’d), How to use the picture menu controls, How to use the t – Philips 30PW8502-37 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How TO USE THE T
imer
M
enu
C
ontrols
(C
ont
’
d
)
A
uto
C
hron
A
utoChron™ can automatically set the TV’s onscreen
clock. Since the time is received from a broadcast
signal, you must be sure that a cable TV or Antenna
signal is present before you use the AutoChron™ fea
ture.
Press the CLOCK button on the remote control
I to display the Timer onscreen menu.
Press the CURSOR DOWN button untU
AutoChron is selected.
Press the CURSOR RIGHT button to display
the AutoChron menu. Mode will he highlighted.
^ Press the CURSOR RIGHT button to display
toggle between Manual and Auto.
Press the CURSOR DOWN button to select
Tune Zone.
^ Press the CURSOR RIGHT button to enter the
Time Zone menu.
^ Press the CURSOR UP or CURSOR DOWN
buttons to select the correct Time Zone. To
activate the Time Zone, press the CURSOR
LEFT button.
Press the CURSOR DOWN button to select
DST (Daylight Savings Time).
If your time zone uses Daylight Savings Time,
press the CURSOR RIGHT or CURSOR
LEFT button to toggle between Off or On, and
select On.
Press the CURSOR DOWN to select Channel.
Then use the NUMBERED buttons to enter
your local PBS channel or any local channel
that transmits the current time. You can also use
the CURSOR RIGHT or CURSOR LEFT but
tons to change channels one at a time. If TIME
FOUND appears,the process is finished. If not,
follow the onscreen instructions, and try another
channel.
Press the STATUS/EXIT button when finished to
remove the onscreen menu from the TV screen.
NOTE: If the AutoChron^“ control is unable to find
the time being transmitted on any channels, you may
have to enter the time manually. Refer to the previous
page for details.
12