Cable specifications – Cisco OL-24582-01 User Manual

Page 2

Advertising
background image

C-2

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24582-01

Appendix C Technical Specifications

Cable Specifications

Table C-2

shows the physical and operating environment specifications for the Cisco Unified IP Phone

6911.

Cable Specifications

RJ-9 jack (4-conductor) for handset connection.

RJ-45 jack for the LAN 10/100BaseT connection (labeled 10/100 SW on the Cisco Unified
IP Phone 6901 and 6911).

RJ-45 jack for a second 10/100BaseT compliant connection (labeled 10/100 PC on the
Cisco Unified IP Phone 6911).

48-volt power connector.

Cables

Category 3/5/5e for 10-Mbps cables with four pairs
Category 5/5e for 100-Mbps cables with four pairs

Note

Cables have four pairs of wires for a total of eight conductors.

Distance Requirements

As supported by the Ethernet Specification, it is assumed that the maximum cable length
between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).

Table C-1

Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6901 (continued)

Specification

Value or Range

Table C-2

Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6911

Specification

Value or Range

Operating temperature

23° to 113°F (-5° to 45°C)

Operating relative humidity

10% to 90% (non-condensing)

Storage temperature

-13° to 158°F (–25° to 70°C)

Height

8.07 in. (20.5 cm)

Width

7.4 in. (18.8 cm)

Depth

5.76 in. (14.64 cm)—Excluding the handset

Weight

1.53 lb (697 g)—Black handset phone

1.65 lb (750.3 g)—White handset phone

Power

100-240 VAC, 50-60 Hz, 0.5 A—When using the AC adapter

48 VDC, 0.2 A—When using the in-line power over the network cable

Cables

Category 3/5/5e for 10-Mbps cables with 4 pairs
Category 5/5e for 100-Mbps cables with 4 pairs

Note

Cables have 4 pairs of wires for a total of 8 conductors.

Distance Requirements

As supported by the Ethernet Specification, it is assumed that the maximum cable length
between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).

Advertising